Duplex Conductor 1.5sqmm XLPE LV Power Cable For Construction

Aluminum Duplex Conductor XLPE PVC Low Voltage Power Cable for Construction

• Complete Cable:
  • One phase conductor, and one neutral conductor are insulated with Extruded Cross-Linked Polyethylene (XLPE)
  • Twisted cables form duplex assembly
  • Manufactured and tested in accordance with ANSI/ICEA Standard S-105-692
  • When specified, cable is produced in accordance with UL 854 and listed as a Type USE-2 cable
• Conductors:
  • Class B compressed aluminum 1350-H19 meeting the requirements of ASTM B231 or B786
• Insulation:
  • Insulation is Extruded Black Cross-Linked Polyethylene (XLPE)
  • Phase conductor is black, and the neutral conductor is black identified by three extruded yellow stripes.

Aluminum Duplex Conductor Underground Power Cable Features and Benefits:

• Suitable for direct burial or installations in ducts
• Resistant to abrasion, sunlight, and impact
• For NEC-complying applications, the maximum conductor operating temp is 90°C in wet or dry locations
• Also suitable for non-code-complying temperature of 90°C in wet or dry locations n accordance with ICEA specifications

Aluminum Duplex Conductor Underground Power Cable Applications:

• Intended for use in underground systems operated at 600 volts or less.

Aluminum Duplex Conductor Underground Power Cable Options:

• Aluminum 1350-H16 conductor
• Copper conductors
• Other neutral identification methods
• CDC Combined Duct & Cable
• Reeless Package
• Alloy 8000 Aluminum Conductor
• Type RHH/RHW-2 rating to UL 44
• Type USE-2 per UL 44

Aluminum Duplex Conductor XLPE PVC Low Voltage Power Cable for Construction

These cables are used for electricity supply in low voltage installation system, They are suitable for installation in indoors and outdoors, in cable ducts, under ground, in power and switching stations, local energy distributions, industrial plants, where there is no risk of mechanical damage.

Aluminum Duplex Conductor XLPE PVC Low Voltage Power Cable for Construction

IEC 60502-1

Aluminum Duplex Conductor XLPE PVC Low Voltage Power Cable for Construction

Conductors	Copper or Aluminum
Insulation	XLPE/PVC Insulation
Assembly / Inner Covering	The inner coverings may be extruded or lapped
Armour	Aluminum / galvanized steel / steel wires applied helically over the Inner Covering as per IEC 60502-1, or double aluminum /steel tapes and copper /tinned copper wire can also be manufactured upon request.
Outer Sheath	PVC/PE
Fire Performance of Cable Sheaths	Cables can be supplied with special flame retardant PVC outer sheath to comply with the flame test requirements.

Low Voltage Aluminium 300mm2 XLPE PVC Power Cable for Construction Dimensions

XLPE LV Power Cable

1.5sqmm LV Power Cable

1.5sqmm low voltage outdoor cable

Duplex Conductor 1.5sqmm XLPE LV Power Cable For Construction Images